1 the re connector was developed as a highly reliable, low-cost, crimp style connector for connecting wires to printed circuit boards. well suited for completing the internal connections of office automation equipment, such as personal computers, office computers, and their peripheral devices. features ?reliable, yet low in cost our unique, double-leaf spring contact withstands the stresses caused by repeated mating and unmating and ensures a stable high-pressure connection. the contacts and headers are selectively gold-plated to reduce costs. depending on the application, fully tin-plated contacts and headers are available to further reduce costs. ?space-saving, high-density design measuring only 16.54mm in height and 2.54mm thick when mounted on a printed circuit board, the re connector and header require less mounting space and facilitate high-density circuit design. ?easy contact insertion a slight force is all that is needed to insert the contacts into the housing, because the housing has lances. the position of the contacts in the housing can be visually checked. this facilitates insertion of the contacts in the housing. ?it can be cut to any length to provide a header with any number of circuits notches are provided on the insulator that allow it to be cut to any length without using special tools. specifications ?current rating: 2a ac, dc (5 circuits/awg #24) ?voltage rating: 250v ac, dc ?temperature range: (including temperature rise in applying electrical current) -55?c to +105 ?c(gold plated) -55?c to +85?c(tin-plated) ?contact resistance: initial value/15m ? max. after environmental testing/30m ? max. ?insulation resistance: 1,000m ? min. ?withstanding voltage: 1,500v ac/minute ?applicable wire: awg #30 to #24 ?applicable pc board thickness: 1.2 to 1.6mm * rohs compliant products are published. * refer to "general instruction and notice when using terminals and connectors" at the end of this catalog. * contact jst for details. standards 0 recognized e60389 1 certified lr20812 re connector disconnectable crimp style connectors 2.54mm pitch crimp
2 contact 6.1 1.6 1.5 3.6 1.2 11.5 model no. applicable wire mm 2 awg # insulation o.d. (mm) finish q'ty / reel material rf-sc2210 rf-sc2290 0.05 to 0.22 30 to 24 0.9 to 1.5 phosphor bronze nickel-undercoated, mating part; gold-plated crimping part; tin-plated (reflow treatment) tin-plated (reflow treatment) 10,000 housing b 2.54 14.0 a 2.54 1.27 jst 8 9 2 3.65 2.85 2.5 3.7 14.0 13.1 model no. dimensions (mm) cir- cuits ab q'ty / box material 2 4 5 8 9 re-02 re-04 re-05 re-08 re-09 2.54 7.62 10.16 17.78 20.32 5.08 10.16 12.70 20.32 22.86 pbt, ul94v-0, black 1,000 1,000 1,000 500 500 model no. circuits q'ty / box material 4 re-l04 pa 66, ul94v-0 1,000 re connector with lock with lock rohs compliance note: re-l04 is not ul/csa approved. rohs compliance rf-sc2210 displays (lf)(sn) on a label. rohs compliance
3 header polarizing key 1.5 4.2 0.8 model no. material q'ty / bag pk-rf-1 pbt, ul94v-0, natural (white) 10,000 rohs compliance polarizing key: the polarizing key in the housing prevents misinsertion of the connector to the header. note: 1. tolerances are non-cumulative: 0.05mm for all centers. 2. hole dimensions differ according to the kind of pc board and piercing method. the dimensions above should serve as a guidel ine. contact jst for details. pc board layout (viewed from soldering side) and assembly layout 2.54 0.05 1.27min. 1.46min. (16.6) 3.0 4.06 14.0 4.1min. 3.0 2.9 0.9 +0.1 0 (2.66) 0.9 +0.1 0 2.54 0.05 1.27min. top entry type side entry type re connector crimping machine, applicator 0.64 2.54 1.27 (2.66) 6.0 2.54 3.0 (2.66) 4.0min. 6.0 2.54 3.0 1.52 gold-plated area 0.64 2.54 1.27 model no. material wafer post finish re-h(*) 2td-1130 re-h(*) 2td-1190 pbt, ul94v-0, black brass nickel-undercoated, gold-plated copper-undercoated, tin-plated (reflow treatment) model no. material re-h(*) 2sd-1110 post finish wafer re-h(*) 2sd-1190 pbt, ul94v-0, black brass nickel-undercoated, mating part; gold-plated solder tail; tin-plated (reflow treatment) copper-undercoated, tin-plated (reflow treatment) top entry type side entry type top entry type side entry type rohs compliance tin-plated product displays (lf)(sn) on a label. note: 1. a two-digit number (02 to 09) representing the number of circuits should be inserted in (* ). determine the number depending on the number of circuits of the housing or header. 2. contact jst for special products. contact crimping machine crimp applicator dies crimp applicator with dies rf-sc2210 ap-k2n mks-l mk/rf-sc22 aplmk rf-sc22 rf-sc2290
|
